The Windows x64 download link on this page is broken. Does anyone have that file downloaded you could provide here? I tried reaching out to Dell support but they will not help due to expired warranty.
I have the updated firmware; BIOS at 3.18.00. I'm trying to recover a T610 running 8 2TB drives to use as a back-up and stream for my music. Not for the life of me can I get any software (2008 server, 2012 server, Windows 7, Windows 10) to recognize more than 2TB no matter how I configure the VD on the controller, no matter the RAID level. 2008 does not recognize the VD at all. I am at a loss. Thoughts? Suggestions?
I was updating my H800 and it failed to complete properly. The ending result was failed, but when booting into BIOS i was able to connect to the controller. It shows that the firmware was applied. However when booting into UEFI, the BIOS halts the system 0208 code.
DELL-Chris H
Moderator
•
9.7K Posts
0
May 2nd, 2017 06:00
WitteIT,
We would be happy to help. The updates you requested are listed below.
H700 driver
H700 firmware
Let me know how the update goes.
WitteIT
1 Rookie
•
15 Posts
0
May 2nd, 2017 07:00
I am running 2012 R2 server, when i try to run the driver update, it tells me that this is an unssupported OS. Can i still run it?
theflash1932
9 Legend
•
16.3K Posts
0
May 2nd, 2017 09:00
No, that driver is for 2008 R2. The H700 driver is built into Server 2012 R2, and OMSA is not reporting it as being out of date anyway.
Just update the firmware:
https://downloads.dell.com/FOLDER03292759M/3/SAS-RAID_Firmware_9FVJ2_WN64_12.10.7-0001_A13.EXE
theflash1932
9 Legend
•
16.3K Posts
0
May 2nd, 2017 10:00
Just make sure your BIOS and iDRAC/LCC are up to date, as well as other system firmware.
WitteIT
1 Rookie
•
15 Posts
0
May 2nd, 2017 10:00
That is what i thought. Updated the firmware and it worked.
WitteIT
1 Rookie
•
15 Posts
0
May 2nd, 2017 13:00
Those are all up to date. It was just the firmware. Thanks for the help.
user_1ad3d7
1 Message
0
March 10th, 2020 12:00
The Windows x64 download link on this page is broken. Does anyone have that file downloaded you could provide here? I tried reaching out to Dell support but they will not help due to expired warranty.
Notrevoscaasi
3 Posts
0
July 5th, 2020 11:00
I have the updated firmware; BIOS at 3.18.00. I'm trying to recover a T610 running 8 2TB drives to use as a back-up and stream for my music. Not for the life of me can I get any software (2008 server, 2012 server, Windows 7, Windows 10) to recognize more than 2TB no matter how I configure the VD on the controller, no matter the RAID level. 2008 does not recognize the VD at all. I am at a loss. Thoughts? Suggestions?
killawatt
4 Posts
0
July 12th, 2020 12:00
I was updating my H800 and it failed to complete properly. The ending result was failed, but when booting into BIOS i was able to connect to the controller. It shows that the firmware was applied. However when booting into UEFI, the BIOS halts the system 0208 code.
DELL-Stefan R
Moderator
•
790 Posts
0
July 13th, 2020 01:00
Hi,
first of all, what kind of RAID Level are you using?
Next, have you installed the driver into the OS properly?
If you use a VD with more than 2TB, consider formatting the drive as GPT instead of MBR as MBR does not support larger drives than 2TB.
Maybe that's the trick?
Best regards,
Stefan