I have an R710 that I put a PERC H700 into. All my drives work (I have the 8x2.5" configuration with 6 drives populated). But I have an annoying error. E1A14 SAS cable A failure. Which is clearly not the case as everything is working. Are the SAS cables proprietary or specific? I bought new generic cables, believing the error message was accurate to some extent, but that has not removed the error.
DELL-Chris H
Moderator
•
9.7K Posts
0
October 9th, 2015 06:00
GmanDutch,
The part number needed is cable P110M (SAS 0), and cable N170M (SAS 1). They are the 3.5 controller to backplane cables.
Let me know if this helps.
Zoobarb
1 Message
0
July 5th, 2018 02:00
Hello and Thank you.
I have an R710 that I put a PERC H700 into. All my drives work (I have the 8x2.5" configuration with 6 drives populated). But I have an annoying error. E1A14 SAS cable A failure. Which is clearly not the case as everything is working. Are the SAS cables proprietary or specific? I bought new generic cables, believing the error message was accurate to some extent, but that has not removed the error.
Thank you!