Unsolved
This post is more than 5 years old
1 Message
1
940
November 12th, 2019 09:00
Memory problem PowerEdge T20
I have a PowerEdge T20 that has 8Gb ram. I wanted to upgrade this to 32Gb so I bought 4x M393B1K70QB0-YK0 - Samsung 1x 8GB DDR3-1600 RDIMM PC3L-12800R Dual Rank x4 Module. As far as I can see this should be a supported Ram. But when I insert them the system only beeps 3 times and refuses to boot. (No memory detected)
What am I doing wrong here? Is this unsuported memory or is there something else wrong. If anyone can point me in the right direction that would be greatly appreciated.
** UPDATE ** Found the error. The T20 only supports UDIMM and NOT RDIMM.
0 events found
No Events found!
DELL-Joey C
Moderator
•
4.2K Posts
•
20.9K Points
1
November 13th, 2019 00:00
Hi,
You are right. T20 does not support RDIMM and only support UDIMM.
Reference: https://dell.to/33KWLC7
CharlesIsWorking
2 Intern
•
167 Posts
0
November 13th, 2019 11:00
Awww bummer, I was looking at the RAM I have here and it is Registered.