Memory problem PowerEdge T20

Question

I have a PowerEdge T20 that has 8Gb ram. I wanted to upgrade this to 32Gb so I bought 4x M393B1K70QB0-YK0 - Samsung 1x 8GB DDR3-1600 RDIMM PC3L-12800R Dual Rank x4 Module. As far as I can see this should be a supported Ram. But when I insert them the system only beeps 3 times and refuses to boot. (No memory detected) What am I doing wrong here? Is this unsuported memory or is there something else wrong. If anyone can point me in the right direction that would be greatly appreciated. ** UPDATE ** Found the error. The T20 only supports UDIMM and NOT RDIMM.

DELL-Joey C · Answer

Hi, You are right. T20 does not support RDIMM and only support UDIMM. Reference: https://dell.to/33KWLC7

CharlesIsWorking · Answer

Awww bummer, I was looking at the RAM I have here and it is Registered.

PowerEdge Hardware General

Was this post helpful?