Unsolved
This post is more than 5 years old
1 Message
0
4672
May 21st, 2007 12:00
PE 2950 Broadcom and 3com 4250T
I have a PE 2950 running Windows 2003 R2 connected as follows:
PE2950 - Cisco 3750G - 3com 4250T - Optiplex GX270
The throughput on the Optiplex is less than 1Mb/s. If I plug the Optiplex into the Cisco or use a 3com 3300/4400 the throughput goes up to 90Mb/s. Are there any issues with the Broadcom NICs and the 3com 4250T?
0 events found
No Events found!