Unsolved
5 Posts
0
603
Per6/i Drive in foreign state
Good day, I am really new with the Dell Perc controller and some help would appreciated. Here goes, one of our drives in a raid 5 started blinking orange after a power outage in our environment. The technician reseated the drive, blinking light went green but now the drive is seen as foreign. I dont want to lose any data but are not seeing any options to sync the drive with the config on the controller.
theflash1932
9 Legend
9 Legend
•
16.3K Posts
0
November 14th, 2018 12:00
You need to CLEAR the foreign configuration, then assign it as a hot-spare. If it fails again, throw it away and get a validated replacement.
You clear the foreign configuration in OMSA, Storage, PERC, Information/Configuration link at the top of the page, then foreign/clear from the dropdown menu of Available Tasks for the controller.