Power Edge R310 Update firmware PERC S300

Hello

If i try  updating PERC firmware (SAS-RAID_Firmware_RPCKX_WN32_2.0.0-016600193000_A06) whilst the server is online, the RAID and SO restarted intact?

Yes, your RAID and OS should be intact after the upgrade. The firmware upgrade will not take effect until after you restart the system. The system should be restarted after applying the update. It is best practice to always have a valid tested backup before performing any hardware/software changes on a production system.

Thanks

Thanks for our help.

2 of those servers have installed the firmware old version v.1.0.1-0021+00193000. The last one is v.2.0.0-0166+00193000 FW , A06.
Is possible upgrading over this old version?

2 of those servers have installed the firmware old version v.1.0.1-0021+00193000. The last one is v.2.0.0-0166+00193000 FW , A06. Is possible upgrading over this old version?

Yes

Thanks for your help.
I appreciate so much this.

Now,  my portal for this service tag offer me firmware win32, but all my servers is on win64.
(check attach image)

Which is correct type, win32 or win64?

Thanks again.

Best regards

Now,  my portal for this service tag offer me firmware win32, but all my servers is on win64. (check attach image) Which is correct type, win32 or win64?

The top of the drivers and download page has an option to select your operating system. If you are running a 64 bit OS then use the 64 bit installer.