Unsolved

This post is more than 5 years old

1 Rookie

 • 

2 Posts

8451

December 27th, 2006 21:00

PowerEdge 1600SC - Three System Beep

So, has anyone ever encountered somthing like this:

I've got the afore mentioned PowerEdge running Windows 2000 Server, running as a 4D Database Server. About every 5-15 minutes, the system will beep three times in quick succession. There doesn't seem to be any regularity to the interval between each set of three, and it doesn't correspond to any events in any of the logs. Nor does it seem to be promted by any action of users.

I've tried running Dell diagnostics on the server,... turned up a fried power supply, but that apparently was not the issue.

Any thoughts, suggestions?

Thanks for your help.

2 Intern

 • 

174 Posts

January 8th, 2007 16:00

JDRatLSC,
You need to check the ESM logs to see if there are any errors reported. 

1 Rookie

 • 

2 Posts

January 12th, 2007 12:00

No dice, I'm afraid.

I looked at the ESM logs,... apparently the chassis door was not seated properly. But I fixed that, no new errors in the log for the last 24 hours,... but its definitely still beeping.
No Events found!

Top