Unsolved
This post is more than 5 years old
2 Posts
0
2767
June 5th, 2018 01:00
PowerEdge T710 memory upgrade
Hi all.
We have a PE T710 with one E5520 processor and 9 Samsung M391B5773CH0-CH9 2GB PC3-10600E DDR3 1333 ECC.
We would like to upgrade with two processors and 16 Gb of ram per processor (32 Gb intotal). Since we get clear that the processors should be the same (E5520), regarding the memory we are a bite confused. Wich should be is the best choice to go with the best performance?
Thanks in advance.
No Events found!
Optimalpyme
2 Posts
0
June 5th, 2018 09:00
Hi Trish.
Thank you very much for your answer. However i must apologize because the processor is NOT E5520. It is E5620. As I can see in here:
https://ark.intel.com/products/47925/Intel-Xeon-Processor-E5620-12M-Cache-2_40-GHz-5_86-GTs-Intel-QPI
this processor has same memory speed compatibility. In the other hand as I can see here:
http://www.dell.com/downloads/global/products/pedge/en/server-poweredge-t710-technical-guide-book.pdf
page 23, it is supossed that the E5620 is not compatible with the T710, but it is working as a single processor.
I am really lost. Now the E5620 is working with two 2Gb stick in A1-A4, A2-A5, A3-A6. But if I put another same 2 Gb stick in A7, A8, and A9 it stops working.
Thank you very much