Unsolved
This post is more than 5 years old
1 Rookie
•
93 Posts
0
1174
April 22nd, 2016 07:00
R530: cpu heatsink and PERC cabling
Hi to all
I have an R530 with monolithic H330 and a single CPU.
I've ordered the second CPU and an H730 add-on card.
Can I have the part number for the second heatsink and any cable adapter, if any, for using the PERC H730 ? Actually SAS cables are directly connected to the monolithic card and I'm unable to plug them to the H730 add-on card.
No Events found!
ale123
1 Rookie
•
93 Posts
0
April 23rd, 2016 02:00
Thank you for the response.
Is the 412-AAGF supported for the second CPU ?
I have the adapter version for H730 but the Specs Sheet doens't tell that is unsupported:
i.dell.com/.../Dell-PowerEdge-R530-Spec-Sheet.pdf
In RAID Controller I can see "PERC H730".
"PERC H730" is different from "PERC H730 Mini Mono", so it should be supported. The only issue are the cabling.
Writing " PERC H730" to the specs, means that PERC H730 is supported. I've bought the card based on this specs. If the only supported version is "mini mono" you should write "PERC H730 mini mono" ............
ale123
1 Rookie
•
93 Posts
0
April 27th, 2016 05:00
So, there is no solution ? I've bought a card based on your wrong specs and I'm unable to use due to a cabling issue?
No cable to change ?