PowerEdge Hardware General
Posts
Unsolved
This post is more than 5 years old
2 Posts
0
27180
March 19th, 2013 16:00
R710 keeps rebooting after I hit F10 to enter diags.
R710 keeps rebooting after I hit F10 to enter diags.
Responses(3)
No Events found!
theflash1932
7 Technologist
7 Technologist
•
16.3K Posts
0
March 19th, 2013 17:00
Do you have a bad drive (ID 0)? Does it reboot when booting the OS or to BIOS?
bimmerjay007
2 Posts
0
March 24th, 2013 11:00
Thank you for your time. I currently have no drives in the machine. When I boot up several of the r710's boxes, I try to access diags by hitting f10. It gives me a message it is entering the setup. But after that, it just continues to reboot. I have 10 of the same configs but 6 machines keep rebooting.....lol
DELL-Daniel My
Moderator
Moderator
•
6.2K Posts
0
March 24th, 2013 13:00
Hello bimmerjay007
Try running a repair install of the USC/LCE and let me know if that fixes the problem. To perform the repair:
Thanks