This post is more than 5 years old
2 Intern
•
743 Posts
0
14794
R820 email alerts
Hi,
I notice that on our R820's that email alerting is not switched on by default for all CRITICAL alerts.
Seems to be a random selection as to which are enabled and those conditions which are not.
- Is there a way to quickly enable ALL CRITICAL alerts to send an email?
(Test email alerts are working OK btw)
Thx,
John Bradshaw
DELL-Shine K
4 Operator
4 Operator
•
3K Posts
1
August 6th, 2015 22:00
What iDRAC FW is installed on the server. You can run below racadm commands to enable E-Mail alerts for all critical alerts. For this to work, you need to have iDRAC FW 1.50.50 or above installed on the server
racadm eventfilters set -c idrac.alert.system.critical -a none -n email
racadm eventfilters set -c idrac.alert.storage.critical -a none -n email
racadm eventfilters set -c idrac.alert.audit.critical -a none -n email
racadm eventfilters set -c idrac.alert.Config.critical -a none -n email
Note : For some category you might get an error message saying "Few alert settings have failed". This is normal as E-Mail alert is not supported for all critical alerts.
bradje1
2 Intern
2 Intern
•
743 Posts
0
August 9th, 2015 16:00
Thx very much Shine
JB