Thanks for info, but that's the cli version. The version i currently use is names "Remote Access Configuration Tool" but only seams to be compatible with idrac8 and lower.
Im trying to update the idrac firmware. And yes its fine to logon to each server and update. But if you have 60+ servers its good to have the gui tool to send out the firmware to multiple server at the same time.
And now when more idrac9 server is coming online that's not possible anymore.
Sorry for the misunderstanding. I would recommend using OpenManage Enterprise <ADMIN NOTE: Broken link has been removed from this post by Dell>, as it will allow you to update multiple servers as well as manage them. You can find more on performing the updates on multiple servers here.
DELL-Chris H
Moderator
•
9.7K Posts
0
January 30th, 2020 06:00
MattiasZ,
I believe the tool you're looking for can be found here.
Let me know if this helps.
MattiasZ
52 Posts
0
February 3rd, 2020 04:00
Thanks for info, but that's the cli version. The version i currently use is names "Remote Access Configuration Tool" but only seams to be compatible with idrac8 and lower.
DELL-Chris H
Moderator
•
9.7K Posts
0
February 3rd, 2020 05:00
What exactly are you trying to do with the tool, as you could just remote to the iDrac GUI itself. Just trying to confirm.
MattiasZ
52 Posts
0
February 5th, 2020 00:00
Im trying to update the idrac firmware. And yes its fine to logon to each server and update. But if you have 60+ servers its good to have the gui tool to send out the firmware to multiple server at the same time.
And now when more idrac9 server is coming online that's not possible anymore.
DELL-Chris H
Moderator
•
9.7K Posts
0
February 5th, 2020 05:00
Sorry for the misunderstanding. I would recommend using OpenManage Enterprise <ADMIN NOTE: Broken link has been removed from this post by Dell>, as it will allow you to update multiple servers as well as manage them. You can find more on performing the updates on multiple servers here.
MattiasZ
52 Posts
0
February 5th, 2020 05:00
Okay thanks, i will manage this with openmanage console instead.