You can make drain power at first as a few steps you can try. Drain server flea power and check for any error messages during POST 1) Remove any external peripherals from the server 2) Turn system off and remove input power from the server 3) Hold down power button for 10 seconds with power unplugged and then wait for one minute 4) Re-apply input power and turn system on.
Later on, please try to minimum to post configuration. The minimum is to remove everything from the server up to POST, but the following devices;
Minimum To Post
Motherboard
CPU 1 w/heatsink
1 Power Supply
1 DIMM for CPU 1 - Slot A1
Control Panel
Riser card
Try powering up and see if the error reappears.
I don't know how many processors there are on the server, but if there are two, you can check if you get a warning message from the slot by swapping the processors. This way, you can tell if the problem is with the processor itself or if it is a problem with the motherboard.
DELL-Erman O
Moderator
•
3K Posts
0
August 22nd, 2021 23:00
Hello,
You can make drain power at first as a few steps you can try.
Drain server flea power and check for any error messages during POST
1) Remove any external peripherals from the server
2) Turn system off and remove input power from the server
3) Hold down power button for 10 seconds with power unplugged and then wait for one minute
4) Re-apply input power and turn system on.
Later on, please try to minimum to post configuration. The minimum is to remove everything from the server up to POST, but the following devices;
Minimum To Post
Try powering up and see if the error reappears.
I don't know how many processors there are on the server, but if there are two, you can check if you get a warning message from the slot by swapping the processors. This way, you can tell if the problem is with the processor itself or if it is a problem with the motherboard.
Hope this will help!