Unsolved
1 Rookie
•
3 Posts
0
2341
August 15th, 2021 23:00
iDRAC 8 NTP settings not found
Hello,
does anyone know how to set NTP server on DELL servers in iDRAC8? I followed this guide: https://techexpert.tips/dell-idrac/idrac-ntp-configuration/ But I cannot see NTP settings. See screen. enter image description here Does exist a command from SSH?
Thank you
K.
No Events found!
DELL-Shine K
6 Operator
•
3K Posts
0
August 16th, 2021 00:00
iDRAC NTP is a licensed feature and it is available from iDRAC express license onwards. You are not seeing NTP feature on your iDRAC as you have Basic Management license.
You can refer below link for details for various license features in iDRAC.
https://www.dell.com/support/manuals/en-us/idrac8-lifecycle-controller-v2.75.75.75/idrac8_2.75.75.75_ug/licensed-features-in-idrac7-and-idrac8?guid=guid-e7b32690-602f-4f14-ab6e-ad00b4a42e4a&lang=en-us
B.Gunnells
1 Rookie
•
1 Message
0
June 23rd, 2022 07:00
K,
I was having the same issue, but by following the guide linked in your post, I was successful in setting up NTP on my iDRAC8. I noticed in your screenshot, however, you're still viewing the 'Properties / Summary' page. No NTP information is displayed here. Only when I clicked on the 'Settings' tab did I finally see the Time Zone setting and NTP configuration. Make sure you've clicked over to the correct tab...
Regards,
-=BG