This post is more than 5 years old
1 Rookie
•
63 Posts
0
135882
Dell PowerEdge R710 BIOS settings for EXSi 5
Hi all,
I am going to install EXSi 5 on the brand new Dell PowerEdge R710, would you like tell me there is some best practice for BIOS setting?
thanks
DELL-Chris H
Moderator
Moderator
•
8.8K Posts
1
February 15th, 2012 07:00
A.W.,
You will need to access the BIOS and under Processor settings verify that Virtualization Technology is Enabled. Beyond that it should be set for what you have installed in the server. i.e. raid card etc.
Also if you are using ESXi embedded (on the SD card) then you will need to set the boot order for the SD.
A.W
1 Rookie
1 Rookie
•
63 Posts
0
February 27th, 2012 06:00
Thanks, any other settings in BIOS? e.g. Memory, Power...