Unsolved
This post is more than 5 years old
1 Message
0
1688
Powerpath 5.3 for Windows and wmi class win32_Diskdrive
Hello Community,
I'm working with Powerpath in a Windows environment. We are using MS SCCM 2007 to collect data from servers an distribute software like
Powerpath for Updating Purposes. With earlier versions than 5.3, I could read the Powerpath Storage ID out of the wmi class win32_diskdrive
where it was stored as PNP Device ID. Therefore I was able to built a SCCM Report to identify the EMC - Storage Subsystem like DMX3, or Clariion.
With the Upgrade of Powerpath 5.3, the information does no longer exist, therefore I can't use the reports no longer.
Is there a way, to get this information again from the wmi class ?
Arniebaer
gadctm
4 Posts
0
July 25th, 2010 13:00
Je serai absent(e) à partir du 19/07/2010 de retour le 12/08/2010.
Durant cette période:
le support GA est assuré par O. Chesnel et T. Frewer
la permanence GA/SI est assurée par S. Tantot (1132)
Cordialement,
Rémi
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
July 28th, 2010 06:00
Hello Arniebaer,
Are you possibly referring to MS SCOM? If so, with SCOM for PP 5.3, EMC provided a Maintenance Pack which can be downloaded from Powerlink or included in Powerpath software media CD. Attached is the userguide. Hope this helps.. If so, please mark this thread answered.. Thanks..
1 Attachment
EMCPower.MgmtPack.5.3.UserGuide.pdf
SamCl
54 Posts
0
July 28th, 2010 08:00
Hello
Just so you dont think we are ignoring your question I have posted the question with EMC engineering
Brion2
154 Posts
0
July 28th, 2010 10:00
Hello. Has a case been opened with EMC Customer Support on this issue?
Thanks, Brion
gadctm
4 Posts
0
July 28th, 2010 13:00
Je serai absent(e) à partir du 19/07/2010 de retour le 12/08/2010.
Durant cette période:
le support GA est assuré par O. Chesnel et T. Frewer
la permanence GA/SI est assurée par S. Tantot (1132)
Cordialement,
Rémi
gadctm
4 Posts
0
July 28th, 2010 13:00
Je serai absent(e) à partir du 19/07/2010 de retour le 12/08/2010.
Durant cette période:
le support GA est assuré par O. Chesnel et T. Frewer
la permanence GA/SI est assurée par S. Tantot (1132)
Cordialement,
Rémi
SamCl
54 Posts
0
July 28th, 2010 22:00
Not as far as I am aware yet
Sam Claret
Technical Support Engineer III
Worldwide Technical Support – OSAPI Windows
Office Hours: Rotating shift, 7AM – 4PM GMT
Office #: +353 21 494 5981
Email: Sam.Claret@emc.com