This post is more than 5 years old
2 Posts
0
8511
December 18th, 2014 03:00
DELL PowerVault TL2000 by Ethernet?
Hi all!
Need advice how to connet DELL PowerVault TL2000 to PowerEdge M1000e through Ethernet?
Is this possible?
If not what kind of module s we need?
No Events found!
DELL-Sam L
Moderator
•
7.7K Posts
0
December 18th, 2014 06:00
Hello maojan,
With the TL2000 to use ethernet you would need to have the iSCSI bridge for the TL2000. Once you have the bridge installed in the TL2000 and configured then you can use iSCSI to connect your M1000 to the TL2000 via iSCSI. The only other way to connect to the TL2000 is via SAS or FC if you have FC drives.
Please let us know if you have any other questions.