PowerVault NX3200 PERC H710 mini supported 4TB+

Hello vitshark,

With an NX3200 it is best to use dell drives in the system to ensure that all are seen correctly.  We have not tested the drive that you posted so I am not able to state if it will work in your NX3200 or not.  In most cases that I have seen it may work but your drives might not report correctly to your PERC card.

Please let us know if you have any other questions.

Thanks for the quick response!
Then I have another question, which disk model would you recommend for my controller, so that I could order it? And please answer as much as possible how much disk is supported by my model of the PERC H710 mini controller?

Hello vitshark,

Here is the spec sheet for a PERC H710.

https://www.dell.com/learn/us/en/04/.../documents~dell-perc-h710-spec-sheet.pdf

Here is also the users guide as well that also list out the specs for your PERC H710. https://downloads.dell.com/manuals/common/rc_h310_h710_h710p_h810_ug_en-us.pdf

Please let us know if you have any other questions.

Thank!
But I can’t open the first link, could you send the correct link?

https://www.dell.com/learn/us/en/04/.../documents~dell-perc-h710-spec-sheet.pdf

Hello vitshark,

https://www.dell.com/learn/us/en/04/shared-content~data-sheets/documents~dell-perc-h710-spec-sheet.pdf

Please let us know if you have any other questions.