To connect the Dell Seagate 600GB SAS hard drives to the Dell PERC H710 RAID card, you'll need the appropriate SAS fan-out cable. The connector on the RAID card is indeed SFF-8088, while the drives have SFF-8482 connectors. The SFF-8482 connectors on the drives are 29-pin connectors, and they also require power, which is typically provided through a 4-pin mini-connector.
The CableDeconn Mini-SAS SFF-8088 to 4 x SAS SFF-8482 with Power Cable you found on Amazon should work for your setup. It's designed to convert the SFF-8088 connector on the RAID card to four SAS SFF-8482 connectors, providing both data and power connections for each drive.
Dell might have similar cables available, but they are usually specific to Dell server configurations, and their part numbers can vary based on the server model and storage options. Since you couldn't find one on the Dell website, the CableDeconn cable you found on Amazon is a good alternative.
Just make sure to double-check the compatibility of the cable with your specific RAID card and drives before purchasing. The fact that it supports SFF-8088 (on the card) to SFF-8482 (on the drives) and provides power for the drives should make it suitable for your configuration, but it's always a good idea to verify the compatibility to avoid any issues during installation.
Additional information concerning hardware can be found here:
serveruser1287
4 Posts
0
July 25th, 2023 09:00
To connect the Dell Seagate 600GB SAS hard drives to the Dell PERC H710 RAID card, you'll need the appropriate SAS fan-out cable. The connector on the RAID card is indeed SFF-8088, while the drives have SFF-8482 connectors. The SFF-8482 connectors on the drives are 29-pin connectors, and they also require power, which is typically provided through a 4-pin mini-connector.
The CableDeconn Mini-SAS SFF-8088 to 4 x SAS SFF-8482 with Power Cable you found on Amazon should work for your setup. It's designed to convert the SFF-8088 connector on the RAID card to four SAS SFF-8482 connectors, providing both data and power connections for each drive.
Dell might have similar cables available, but they are usually specific to Dell server configurations, and their part numbers can vary based on the server model and storage options. Since you couldn't find one on the Dell website, the CableDeconn cable you found on Amazon is a good alternative.
Just make sure to double-check the compatibility of the cable with your specific RAID card and drives before purchasing. The fact that it supports SFF-8088 (on the card) to SFF-8482 (on the drives) and provides power for the drives should make it suitable for your configuration, but it's always a good idea to verify the compatibility to avoid any issues during installation.
Additional information concerning hardware can be found here:
Dell Seagate 600GB 10K RPM 6Gbp/s SAS 2.5 Inch Hard Drive 7T0DW ST9600204SS