Unsolved
This post is more than 5 years old
2 Posts
0
1568
March 19th, 2018 20:00
Teac CAB-200 Precision T3500
I purchased a CAB-200 Media card reader with blue tooth
TEAC CAB-200 P/N 1930940B10
I thought I did my research corectly and purchased cable FH439. the cable does not fit the CAB-200
So I asked the community (wrong area) and was recommended the
GH483 - Cable Assembly for Flex-Bay Media Card Reader
I looked at the pictures of that cable and the white pin plug in the GH483 is in the same location as the FH439
which will not plug into the CAB200.
I am trying to install this into the Version 2 precision T3500 motherboard
any assistance would be appreciated
No Events found!
Tesla1856
10 Wizard
•
17.7K Posts
•
70.7K Points
0
April 1st, 2018 11:00
Flex-Bay is a Dell Proprietary interface ... tricked-out USB, IIRC.
Unless there is a header marked FlexBay on the motherboard, I would not mess with it.
speedstep
11 Legend
•
47K Posts
0
April 11th, 2018 10:00
T3500 has flex bay. CAB 200 works but ONLY with the correct cable.
The TEAC Cab 200 HY306/TH661 with Flex Bay cable is Very specific.
Connector 17 Internal USB Socket (for Flexbay Card Reader) is right next to the CMOS Battery. See page 16 and 17 in the service manual.
GH483 - Cable Assembly for Flex-Bay Media Card Reader 0GH483
https://www.ebay.com/p/GH483-Dell-Cable-Assembly-for-Flex-bay-Media-Card-Reader/1700253480
https://www.disctech.com/Dell-GH483-19-Media-Card-Reader-Cable
https://www.ebay.com/itm/Genuine-Dell-DIMENSION-E520-E521-9200-T3400-760-MEDIA-CARD-READER-CABLE-GH483-/131283717817
Dell Precision T3500 Service Manual PDF
Precision T3500 Setup and Features Information Tech Sheet PDF