Hi,

Thanks for contacting the community.

Kindly let me know you want to change the printer language or printer software installed on the system.

In case you want to change the printer language, try restoring printer settings back to default.

Please follow below mentioned steps:

1)     Ensure the printer is turned off.

2)     Press the Continue and Cancel buttons at the same time while turning on the printer.

3)     Continue to hold the buttons until all the indicators flash off and then back on, and then release the buttons.

4)     Close the side cover.

Please note: Any user-assigned settings are lost, including the IP address if the printer is connected to a network. Usually, a network assigns IP addresses for a given length of time, called a lease time. If you print the "Printer Settings" page again after a very short period of time, the IP address is likely to be assigned the same IP address it had before you restored the factory settings.

In case you are referring to the printer software which is installed on the system please uninstall/reinstall the printer software from the control panel.

For further help you can refer to the below mentioned link:

http://dell.to/VGSMkd

Please reply if you have any further questions.

Thanks & Regards
Prateek K
#iworkfordell

Hi, Printer Reset to default as per Dell procedure. language unchanged in dialogue box. Any other suggestions? Thanks

What is the make and model of your printer and what Operating system are you using?

If this is the Dell 1320C is this the way you reset defaults.

Resetting Defaults

After executing this function and rebooting the printer, all the menu parameters, except the parameters for the network, are reset to their default values.

Click Start® All Programs® Dell Printers® Additional Color Laser Software® Status Monitor Console.

The Printer Selection dialog box opens.

Click Dell Color Laser 1320c listed in Printer Name.

The Dell Color Laser 1320c Launcher window opens.

Click the Tool Box button.

The Tool Box opens.

You can also launch the Tool Box from the printer icon on the taskbar.

Click the Printer Maintenance tab.

Select Reset Defaults from the list at the left side of the page.

The Reset Defaults page is displayed.

Click Start to initialize the non-volatile memory (NVM) memory.

The printer is turned off automatically to apply the settings.

I am having the same problem. I could only find Swedish drivers and now my Windows printer preferences dialogue window is all in Swedish. I found my English drivers and reinstalled but it's still Swedish. I have tried resetting to defaults but it is clearly a driver issue in Windows, not a printer issue.