Unsolved
This post is more than 5 years old
2 Posts
0
84474
Resetting the maintenance count on a Dell Printer Model 3330dn
I need to know how to reset the maintenance count on a Dell Printer Model 3330dn. Heading out today to replace the fuser. Thank you
DELL-NIKHIL M
240 Posts
0
November 9th, 2012 06:00
Hi dominionitsolutions,
Below are the following steps to reset the maintenance count on a Dell printer model 3330dn.
1Turn off the printer.
2. Press and hold (check) and (right arrow).
3. Turn on the printer.
4. Release the buttons when performing Self-Test displays.
The message CONFIG MENU displays on the top line of the operator panel.
5. Select Reset Maintenance Count from the Configuration menu.
6. The message Reset Maint Cnt=Reset displays momentarily. Press (check) to reset.
When the reset operation is complete, the menu returns to the Printer Setup Reset
Maintenance Count Screen. Scroll down to the Exit Configuration Menu and Press
Select to Return to Ready status.
Please do get back to us on any further assistance.
DELL-NIKHIL M
240 Posts
0
November 28th, 2012 09:00
Hi billfoltz01,
You don’t need to replace a fuser until it goes bad. Usually it will last for a couple of years.
You will be able to print more than 100000 to 200000 pages.
Please do get back to us on further assistance or information.
billfoltz01
1 Message
0
November 28th, 2012 09:00
How many pages does the 3330 print before needing the fuser replaced?