Unsolved
This post is more than 5 years old
8 Posts
0
12388
Rails for IMU system?
Hello,
We recently installed a new IDS system on our network, a Cisco IMU box. The case is a 1U, manufactured by Dell. It only came with a post rail kit however (P/N 9M103), which does not work in our rack enclosure (APC AR2100BLK). Our rack is a 19" wide, and about 30" between front and rear mounting holes. I've been looking around for a 1U rail kit that will work, but I can't seem to find anything about this IMU box anywhere. I've seen versa rails mentioned a couple of times, but again, I can't seem to find any specific information on them to verify if they will work for this. If anyone has any information or suggestions on which rails will work for this box, I'd greatly appreciate it.
Thanks.
trigger113
1 Message
0
March 9th, 2009 13:00
Same deal here. I can't find any information regarding these IMU devices
RackSolutions
171 Posts
0
March 10th, 2009 11:00
There are several options available from small adapter brackets to 3rd Party Rails that will extend to the depth that you need. Your Dell Account rep. can order these for you using the following P/Ns.
1U Adapter Brackets: Dell SKU A0013646
1U Generic Rail Kit: Dell SKU A0137220
If these don't resolve your issue please don't hesitate to call me.
Will Beene