This post is more than 5 years old
236 Posts
0
4555
How to ping from RPA nodes
Hi All,
Does anyone know if there is a ping command for an RPA node (when I log in to it via SSH) to ping from a WAN interface to a remote cluster?
Appreciate your input.
This post is more than 5 years old
236 Posts
0
4555
Hi All,
Does anyone know if there is a ping command for an RPA node (when I log in to it via SSH) to ping from a WAN interface to a remote cluster?
Appreciate your input.
Top
fadliz
153 Posts
0
May 3rd, 2015 09:00
Hi there, ssh to the RPA using boxmgmt and go to option 3 diags and then option 5 for internal commands. You will see ping as one of the options (depending on the version of RP the menu options might be different). To ping using the wan interface, use 'ping -I eth0'
Thx, Z
RP Corp Sys Eng.
Sent from my iPhone
victory_is_mine
236 Posts
0
May 3rd, 2015 09:00
Great, thank you.
avmaint
115 Posts
0
May 15th, 2015 01:00
any equivalent of traceroute?
forshr
1.1K Posts
0
May 15th, 2015 04:00
Not from the 'Run internal commands' option from Diagnostics using boxmgmt but you can request a signed script with the command and run it from Set -> Advanced Options -> Run script.