Unsolved
This post is more than 5 years old
29 Posts
0
863
Replace GEN1 with GEN4
Current configuration.
Two GEN1 (originals) and three GEN4.
GEN1 are RPA1 and RPA2
One cluster.
I need to replace the GEN1 with two new GEN4
Given that the GEN1s control the cluster, can I still use RPA Replacement wizard to replace the GEN1 (one at a time) with GEN4?
DA
117 Posts
0
July 5th, 2012 10:00
Yes. Ideally, determine the RPA with the site control (whichever has the virtual IP) and start with the other RPA.