This post is more than 5 years old
44 Posts
0
1946
SOS “autostart cluster when pull out wan cable , the server will reboot,”
hi, export:
following my situation:
two hp PC server , windows 2008 r2, autostart 5.4
configuration , mirroring for windows .
but when i try to pull my WAN network everytime , the OS will reboot,
so my question; is the situation normal ?
becasuse of i configure another autostart cluster , pull out WAN network , the Resource Group will automatic switch to passive server ,,never reboot the server,
best regards
yito1
262 Posts
0
July 27th, 2011 21:00
Hi,
The role of the network of AutoStart is the following.
Correct example
WAN cable-- Domain Line -- For client connection
Mirror -- Verification Line -- CrossOver
third Network -- Domain Line
yito1
262 Posts
1
July 27th, 2011 18:00
Hi,
Do you set Isolation?
Please read P.153 of the Administrator's Guide.
xiazhen
44 Posts
0
July 27th, 2011 18:00
yes, i am set isolation,
but why another autostart software dont reboot ?
xiazhen
44 Posts
0
July 27th, 2011 19:00
no, the different domain and different server host
xiazhen
44 Posts
0
July 27th, 2011 19:00
hi,expert,
thank your reply me .
my meaning , i have already configure two autostart software cluster with different PC server. one domain test1 , another domain test2.
so it dont relation between of two domain for physical.
when i try to pull out wan cable , the domain test1, it is the resource group can switch to passive server , the server cannt reboot.
when i try to pull out wan cable , the domain test2, it is the resource group can switch to passive server , the server will reboot.
best regards
xiazhen
44 Posts
0
July 27th, 2011 19:00
hi,expert, do you have msn ?
can i directly chat with you ?
yito1
262 Posts
0
July 27th, 2011 19:00
Hi,
Your situation cannot be understood.
You are composing AutoStart of two sets.
Two sets and Isoration are set.
And, the cable is pulled out.
However, only one cluster is rebooted.
Is this recognition correct?
yito1
262 Posts
0
July 27th, 2011 19:00
Hi,
Do another clusters participate in the same AutoStart domain?
yito1
262 Posts
1
July 27th, 2011 19:00
Hi,
Is the IP setting in Isolation right?
For example, the IP to set here is router or Gateway.
xiazhen
44 Posts
0
July 27th, 2011 20:00
hi, expert:
i have read your another reply to another person, i unstander my question,
because of the domain test1 is three network cable ,
siutation of the domain test1
one wan cable
two crossover cable
three crossver cable ,
the customer require i do following
one wan cable for corporation,
two crossover cable for mirroring
three crossover cable for heartbeat
so i do ,
i configure following. is the configure right ?
userage of one wan cable is domain network , point to point
userage of two crossover cable is domain network , point to point
userage of three crossover cable is domain network, point to point
the result :
i can pull out wan cable , the resoure group can switch the passive sever , the active server dont reboot.
another domain test2 with another two physical PC server ,
the situation following :
one wan cable for corporation,
two crossover cable for mirrioning and hearbeat
three corssover cable is disable from windows,.
the result:
when i try to pull out wan cable , the resoure group switch to passive server , the active server is reboot.
i think so it is the question of reason,
best regards