Unsolved
This post is more than 5 years old
69 Posts
1
3472
What EMC products are supported by ESRS?
for the most up to date list of ESRS supported products, please view the ESRS Site Planning Guide on Powerlink. As of July 2011, ESRS supports the following EMC Products:
Product |
Environment/Application Releases |
EMC Atmos |
Atmos 1.4 or later |
EMC Avamar |
Avamar 6.0 or later |
Fabric Manager managing Brocade B-series switches |
Brocade B-series switches running Fabric OS 5.0.1b through 6.1.0x only, with Fabric Manager 5.2.0b or later |
EMC Celerra |
NAS Code 5.4 or later |
EMC Centera |
CentraStar® 2.4 or later |
Cisco switches |
MDS9000 Family switches that are running SAN-OS 3.3(2) or later and NX-OS 4.1(1b) or later. Nexus 5000 Family switches that are running NX-OS 4.1(3)N1(1) or later. |
EMC CLARiiON CX, CX3, CX4, and AX4-5 Series storage systems (distributed or Enterprise environments) |
FLARE® Operating Environment 2.19 or later Navisphere® Manager 6.19 or later Note: The AX-100/AX-150 are not supported as they do not support the required CLARalert. The AX4-5 series are supported only if the Navisphere Full license (with CLARalert) is purchased and installed on the storage system. |
EMC Connectrix Manager (CM) managing Connectrix M-series switches |
Connectrix Manager 7.x with DialEMC 2.2.10, or Connectrix Manager 8.x or later with ConnectEMC 1.x |
Connectrix Manager (CM) managing Connectrix M-series and B-series switches |
Connectrix Manager 9.6.2 or later with ConnectEMC 1.x |
Connectrix Manager Data Center Edition (CMDCE) managing Connectrix M-series and B-series switches |
Connectrix Manager Data Center Edition 10.1.1 or later with ConnectEMC 4.0.2 |
EMC Disk Library for mainframe (DLm) |
DLm4020, DLm4080, release 1.2 and later |
EMC Disk Library (EDL) |
DL-5100 and 5200 series DL-4000 series — DL-4100, DL-4106, DL-4200, DL-4206, DL-4400A/B, DL-4406A/B DL-700 series — DL-710, DL-720, DL-740 DL-310 DL3D 1500, 3000, 4000 — release 1.01 and later |
EMC Greenplum Data Computing Appliance (DCA) |
Greenplum 4.0 |
EMC Invista |
Invista 2.2 or later |
EMC RecoverPoint |
RPA 3.1 and later |
EMC Symmetrix 8000 Series |
Enginuity™ 5567 and 5568 with Service Processor Part Number 090-000-064, 090-000-074, or 090-000-09x |
Symmetrix DMX Series |
Enginuity 5670, 5671 |
Symmetrix DMX-3 Series |
Enginuity 5771, 5772, 5773 |
Symmetrix DMX-4 Series |
Enginuity 5772, 5773 |
Symmetrix VMax Series |
Enginuity 5874, 5875 |
EMC VNX |
VNX Operating Environment (OE) for Block 05.31.000.5.006 or greater VNX Operating Environment (OE) for File 7.0.12.0 or greater |
EMC VNXe |
VNXe 2.0.x |
EMC VPLEX |
GeoSynchrony 4.0.0.00.00.11 or later |
RRR
1 Rookie
1 Rookie
•
5.7K Posts
0
October 10th, 2014 02:00
thank you. This is very helpful
Cal-IF4UI
56 Posts
1
October 15th, 2014 12:00
This is the latest Supported List EMC.Support.com Site Planning Guide version 3.02 starting on Page 18
https://support.emc.com/docu55300_ESRS-Release-3.02-Site-Planning-Guide.pdf?language=en_US
Always check EMC.Support.com for the latest documentation.
Cal Buckley
Product
Environment/application releases
EMCAtmos®
Atmos 1.4 or later
EMCAvamar®
Avamar 6.0 or later
EMCCelerra®
NAS Code 5.4 or later
EMCCentera®
CentraStar® 2.4 or later b
Product
Environment/application
releases
EMCCLARiiON®
CX, CX3, CX4, and AX4-5
Series storage
systems (distributed or Enterprise environments)
FLARE® Operating
Environment 2.19 or later Navisphere® Manager 6.19 or later
Note: The AX-100/AX-150 are not supported as they do not support the required
AX4-5 series are supported only if the Navisphere Full license (with CLARalert)
is purchased and installed on the storage system.
EMCConnectrix®
Manager (CM) managing Connectrix M-series switches
Connectrix
Manager 7.x with DialEMC 2.2.10, or Connectrix Manager 8.x or later with ConnectEMC
1.x
Connectrix
Manager (CM) managing Connectrix M-series and B-series switches
Connectrix
Manager 9.6.2 or later with ConnectEMC 1.x e
Connectrix
Manager Data Center Edition (CMDCE) managing Connectrix M-series and B-series
switches
Connectrix
Manager Data Center Edition 10.1.1 or later with ConnectEMC 4.0.2 f
Connectrix
Manager Converged Network Edition (CMCNE) managing Connectrix M-series and B-series switches
Connectrix
Manager Converged Network Edition 11.1.1 or later with ConnectEMC
later
Data Domain
DD OSversion 4.8 or higher
EMCDisk Library
for mainframe (DLm), Gen2
DLm4020, DLm4080,
release 1.2 and later
EMCDisk Library
for mainframe (DLm), Gen3
DLm8000 3.4.0
& 3.4.1
DLm6000 All
releases
DLm2000 All
releases
DLm1000 3.5
EMCDisk Library
for mainframe (DLm), Gen4
DLm8100,
2100V, and 2100D
EMCDisk Library (EDL)
DL-5100 and
5200 series
DL-4000 series
—DL-4100, DL-4106, DL-4200, DL-4206, DL-4400A/B, DL-4406A/B
DL-700 series
—DL-710, DL-720, DL-740 DL-310
DL3D 1500, 3000, 4000 —release 1.01 and later
EMCGreenplum®
Data Computing Appliance (DCA)
Greenplum4.0
EMCInvista®
Invista 2.2
or later
EMCIsilon®
OneFS 7.1
EMCRecoverPoint
RecoverPoint
3.1, 3.2, 3.3, 3.4 and later a
EMCSymmetrix®
8000 Series
Enginuity™5567
and 5568 with Service Processor Part Number c 090-000-064,
090-000-074, or 090-000-09x
Symmetrix
DMX™Series
Enginuity
5670, 5671
Symmetrix
DMX-3 Series
Enginuity
5771, 5772, 5773
Symmetrix
DMX-4 Series
Enginuity
5772, 5773
SymmetrixVMax™Series
Enginuity
5874, 5875
Symmetrix
Device Client
Enginuity
5670, 5671, 5771, 5772, 5773, 5874, 5875
Product
Environment/application releases
EMCViPR®
Contact your EMCrepresentative
EMCVMAX Cloud Edition (CE)
Contact your EMCrepresentative
EMCVMAX3
Enginuity 5977
Switch - Fabric Manager managing Brocade B-series switches
Switch - Cisco
Note: MDSswitches require Fabric Manager
or Cisco DataCenter Network Manager (DCNM) to be the same version or higher than the highest switch firmware version. Nexus
requires Fabric Manager 5.0(1a) or higher.
EMCVNX®
VNXOperating Environment (OE) for Block 05.31.000.5.006 or greater VNXOperating Environment (OE) for File 7.0.12.0 or greater
VNXControl Station Device Client
VNXOperating Environment (OE) for Block 05.31.000.5.006 or greater VNXOperating Environment (OE) for File 7.1.44 or greater
EMCVNXe®
VNXe 2.0.x
VNXe Device Client
VNXe 2.0.x
EMC VPLEX®
GeoSynchrony 4.0.0.00.00.11 or later
EMCXtremIO®
XtremIO 2.2.x and greater
XtremIODevice Client
XtremIO 2.2.x and greater