Unsolved
This post is more than 5 years old
43 Posts
0
1337
Not able to remove SRDF - RDF groups
Hi,
Can you please guide me how to remove rdf groups in one array, this array is not able to communicate with the remote array.
Please find the below details, this is a DMX800 box.
S Y M M E T R I X R D F G R O U P S
Local Remote Group RDFA Info
-------------- --------------------- ----------------------- -----------------
LL Flags Dir Flags Cycle
RA-Grp (sec) RA-Grp SymmID T Name LPDS Cfg CSRM time Pri
-------------- --------------------- ----------------------- ----- ----- ---
20 (13) 10 - - D kirrdfg2 XX.. - -IS- 30 33
27 (1A) 10 - - D sys4rdf XX.. - -IS- 30 33
28 (1B) 10 - - D sun1grprdf XX.. - -IS- 30 33
31 (1E) 10 - - D emc3rdfg XX.. - -IS- 30 33
37 (24) 10 - - D sunilrdfg XX.. - -IS- 30 33
39 (26) 10 - - D emc7rdfg XX.. - -IS- 30 33
44 (2B) 10 - - D lakshmi XX.. - -IS- 30 33
50 (31) 10 - - D rdfg50 XX.. - -IS- 30 33
51 (32) 10 - - D rdfg51 XX.. - -IS- 30 33
52 (33) 10 - - D rdfg52 XX.. - -IS- 30 33
54 (35) 10 - - D emcmyrdfg XX.. - -IS- 30 33
57 (38) 10 - - D suman6rdfg XX.. - -IS- 30 33
Legend:
? : Unknown
Group (T)ype : S = Static, D = Dynamic
Director (C)onfig : F-S = Fibre-Switched, F-H = Fibre-Hub
G = GIGE, E = ESCON, T = T3, - = N/A
Group Flags :
Prevent Auto (L)ink Recovery : X = Enabled, . = Disabled
Prevent RAs Online Upon (P)ower On: X = Enabled, . = Disabled
Link (D)omino : X = Enabled, . = Disabled
(S)TAR mode : N = Normal, R = Recovery, . = OFF
RDFA Flags :
(C)onsistency : X = Enabled, . = Disabled, - = N/A
(S)tatus : A = Active, I = Inactive, - = N/A
(R)DFA Mode : S = Single-session, M = MSC, - = N/A
(M)sc Cleanup : C = MSC Cleanup required, - = N/A
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
May 30th, 2011 06:00
https://community.emc.com/thread/121544?tstart=0
lakshman1
43 Posts
0
May 31st, 2011 03:00
Hi Dynamox,
Thank you for the response, but I didn't able to succeed with the problem.
I am not able to remove the rdf groups
Please find the below details for your reference.
please suggest me..
root@emc1#symdev -sid 277 list -dynamic
Symmetrix ID: XXXXXXXXX277
Device Name Directors Device
--------------------------- ------------- -------------------------------------
Cap
Sym Physical SA DA :IT Config Attribute Sts (MB)
--------------------------- ------------- -------------------------------------
0003 Not Visible ***:* 02A:C3 2-Way Mir N/Grp'd RW 1024
0004 Not Visible ***:* 15A:C0 2-Way Mir N/Grp'd RW 1024
0005 Not Visible ***:* 16A:C1 2-Way Mir N/Grp'd RW 1024
0006 Not Visible ***:* 15A:C2 2-Way Mir N/Grp'd RW 1024
0007 Not Visible ***:* 16A:C3 2-Way Mir N/Grp'd RW 1024
0008 Not Visible ***:* 01A:C0 2-Way Mir N/Grp'd RW 1024
0009 Not Visible ***:* 02A:C1 2-Way Mir N/Grp'd RW 1024
000A Not Visible ***:* 01A:C2 2-Way Mir N/Grp'd WD 1024
000B Not Visible ***:* 02A:C3 2-Way Mir N/Grp'd RW 1024
000C Not Visible ***:* 15A:C0 2-Way Mir N/Grp'd RW 1024
000D Not Visible ***:* 16A:C1 2-Way Mir N/Grp'd RW 1024
000E Not Visible ***:* 15A:C2 2-Way Mir N/Grp'd RW 1024
001B /dev/rdsk/emcpower0c 16C:0 15A:C2 2-Way Mir N/Grp'd RW 1025
001C /dev/rdsk/emcpower1c 02C:0 16A:C1 2-Way Mir N/Grp'd RW 1025
001D Not Visible ***:* 16A:C3 2-Way Mir N/Grp'd RW 1025
001E Not Visible ***:* 01A:C0 2-Way Mir N/Grp'd RW 1025
001F Not Visible ***:* 02A:C1 2-Way Mir N/Grp'd RW 1025
root@emc1#symdev -sid 277 list -rdf1
Symmetrix ID: XXXXXXXXX277
Could not select any Symmetrix devices to list.
root@emc1#symdev -sid 277 list -rdf2
Symmetrix ID: XXXXXXXXX277
Could not select any Symmetrix devices to list.
root@emc1#symcfg -sid 277 list -rdfg all
Symmetrix ID : XXXXXXXXX277
S Y M M E T R I X R D F G R O U P S
Local Remote Group RDFA Info
-------------- --------------------- ----------------------- -----------------
LL Flags Dir Flags Cycle
RA-Grp (sec) RA-Grp SymmID T Name LPDS Cfg CSRM time Pri
-------------- --------------------- ----------------------- ----- ----- ---
20 (13) 10 - - D kirrdfg2 XX.. - -IS- 30 33
27 (1A) 10 - - D sys4rdf XX.. - -IS- 30 33
28 (1B) 10 - - D sun1grprdf XX.. - -IS- 30 33
31 (1E) 10 - - D emc3rdfg XX.. - -IS- 30 33
37 (24) 10 - - D sunilrdfg XX.. - -IS- 30 33
39 (26) 10 - - D emc7rdfg XX.. - -IS- 30 33
44 (2B) 10 - - D lakshmi XX.. - -IS- 30 33
50 (31) 10 - - D rdfg50 XX.. - -IS- 30 33
51 (32) 10 - - D rdfg51 XX.. - -IS- 30 33
52 (33) 10 - - D rdfg52 XX.. - -IS- 30 33
54 (35) 10 - - D emcmyrdfg XX.. - -IS- 30 33
57 (38) 10 - - D suman6rdfg XX.. - -IS- 30 33
Legend:
? : Unknown
Group (T)ype : S = Static, D = Dynamic
Director (C)onfig : F-S = Fibre-Switched, F-H = Fibre-Hub
G = GIGE, E = ESCON, T = T3, - = N/A
Group Flags :
Prevent Auto (L)ink Recovery : X = Enabled, . = Disabled
Prevent RAs Online Upon (P)ower On: X = Enabled, . = Disabled
Link (D)omino : X = Enabled, . = Disabled
(S)TAR mode : N = Normal, R = Recovery, . = OFF
RDFA Flags :
(C)onsistency : X = Enabled, . = Disabled, - = N/A
(S)tatus : A = Active, I = Inactive, - = N/A
(R)DFA Mode : S = Single-session, M = MSC, - = N/A
(M)sc Cleanup : C = MSC Cleanup required, - = N/A
root@emc1#symrdf removegrp -rdfg 57 -sid 277
Execute a Dynamic RDF Removegrp operation for
Group Number: '57' for Symm: XXXXXXXXX277 (y/ ) ? y
Could not find any valid (online and connected) RA Director to use for remote call
root@emc1#symrdf removegrp -label suman6rdfg -sid 277
Execute a Dynamic RDF Removegrp operation for
Group Label: 'suman6rdfg' on Symm: XXXXXXXXX277 (y/ ) ? y
Could not find any valid (online and connected) RA Director to use for remote call
root@emc1#
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
May 31st, 2011 04:00
did you try "symrdf half_deletepair" that i referenced in that thread ?
RobertDudley
448 Posts
0
May 31st, 2011 05:00
With it being a DMX800 the microcode may not support that command. You may have to engage EMC for this.
lakshman1
43 Posts
0
June 2nd, 2011 02:00
yes, I tried symrdf half_deletepair.
Since there are no rdf devices in the array, I was not able to provide device file or device group for that command.