Unsolved
This post is more than 5 years old
20 Posts
0
376
Thin pool questions
Easy question, I hope. What the best practice for thin pool on how many to have? I have 3 tiers so I assume I need at least three thin pools. Do you segregate by application type? Create them based off of your disk pools? Any other way?
Current environment.
Tier 1: 300GB FC R1 – 1 disk group
Tier 2: 600GB FC R5 3+1 – 2 disk groups
Tier 3: 2TB SATA R6 – 1 disk group
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
April 20th, 2011 21:00
we are creating based on disk type, EFD (R5) , FC ( R5) and SATA (R6)
M39
11 Posts
0
April 20th, 2011 22:00
Hi Hank D,
Logically Speaking EMC terminology follows
1) Flash Drive - Tier 1
2) FC Drive - Tier 2
3) SATA Drive - Tier 3
Whatever you have & you have created is very much logical…
If drives are of same INTERFACE & SAME CAPACITY then you can consider RPM in future
Thanks,