This post is more than 5 years old
156 Posts
1
5082
SAN COPY UNITY - STOREWIZE V7000
Hi Sir,
I want to know if it is possible to do a SAN COPY from IBM Storagewize to EMC unity 300.
Where can I find san copy matrix and Unity matrix?
Thank you for your time.
adeelmehmood
21 Posts
0
July 31st, 2016 22:00
HI,
please refer to below doc to get the latest for Supported Migration Path to UNITY.
https://support.emc.com/docu69933_Unity_300F,_Unity_400F,_Unity_500F,_Unity_600F,_Unity_300,_Unity_400,_Unity_500,_Unity…
Also , have a look to below SAN COPY article for migration to UNITY
https://support.emc.com/docu71320_Migrating_to_Unity_with_SAN_Copy.pdf?language=en_US
Rainer_EMC
8.6K Posts
0
May 12th, 2016 10:00
No – Unity doesnt implement SANCOPY natively – it can act as a target though
For block replication from IBM to Unity I would suggest RecoverPoint or VPLEX
Or host based options include LVM, PPME or storage vMotion
Rainer_EMC
8.6K Posts
0
May 13th, 2016 10:00
yes if Storwize is in the VPlex support matrix
jmaguileramontero
156 Posts
0
May 13th, 2016 10:00
Thanks Rainer for your answer.
One question more please, can use VPLEX virtual edition to migrate LUN block from IBM storewize to Unity?
Thanks,
jmaguileramontero
156 Posts
0
May 13th, 2016 11:00
I see that in the VPLEX Virtual edition matrix, there is no third party storage supported, only VNX:
Components
EMC Storage Systems a • EMC VNX5200/5400/5600/5800/7600/8000 b
• EMC VNXe 3150/3300
Please check the picture.
Thanks,
Rainer_EMC
8.6K Posts
0
May 13th, 2016 11:00
then I guess it is not supported
kelleg
4.5K Posts
0
August 2nd, 2016 14:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen
Rainer_EMC
8.6K Posts
0
August 3rd, 2016 11:00
Thanks for the feedback – its good for others to know who look for a similar scenario
jmaguileramontero
156 Posts
0
August 3rd, 2016 11:00
Thank you for your help
Rainer_EMC
8.6K Posts
0
August 3rd, 2016 11:00
Could you tell us what you found out and how you are planning to do the migration ?
jmaguileramontero
156 Posts
0
August 3rd, 2016 11:00
Hi Rainer,
To migrate IBM STOREWIZE I can use:
In my case I will do it using host Based tools. For example: For Vmware I will use storage vmotion.
For other application I will map the Unity LUN for host and the migration will be do it at the application level.