Unsolved
This post is more than 5 years old
5 Practitioner
•
274.2K Posts
0
935
Can i know the command to add a Storage Group to a existing masking view ?
Can i know the command to add a Storage Group to a existing masking view ? ( using Enginuity 5874 with SE 7.4)
codyhosterman
286 Posts
1
September 4th, 2013 09:00
You can only add devices to an existing masking view, not storage groups with 5874. SE 7.4 and 5876 allows you to have cascaded storage groups so you could then add an SG into an SG in a masking view. So in your case you would to just need to create a new masking view for the new SG.
sauravrohilla
859 Posts
0
September 4th, 2013 09:00
if you have an existing masking view then a storage group must be there already...Do you want to know how to add the additional device to a storage group/masking view?
regards,
Saurabh
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
September 4th, 2013 11:00
@ Saurabh No .. i wanted to add a newly created storage group to the existing masking view and i already had a SG added to the masking view.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
September 4th, 2013 11:00
dynamox :
Looks like that's the only solution i have right now
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
September 4th, 2013 11:00
Thank you for the answer Cody
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
September 4th, 2013 11:00
was there a requirement why you would want to do that ..i am just curious about the use case.
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
September 4th, 2013 11:00
why not add individual device to existing storage group ?