3 Silver

Re: Unisphere for VMAX Tiers Demand Report

Guys,

I was running thru' the same issue and good the issue has already been discussed. I will upgrade my SE soon.

Quick question:
In the FAST VP settings, "pool reserved capacity is set to default 10%",  and If I would like to reduce the pool reserved capacity to minimum for the SSD pool where I'm not going to bound any tdev, shall I do that in the pool properties ?

So it will keep the PRC of FC pool to default 10% and SSD to 1%. Will it work?

Dino

0 Kudos
3 Argentum

Re: Unisphere for VMAX Tiers Demand Report

Dino,

In Unisphere for VMAX, yes -- it's in the pool properties screen.

For SYMCLI, you'd use symconfigure to configure the pool_resv_cap setting. For example --

symconfigure -sid 1234 -cmd "set pool Thin_Pool1, type=thin, pool_resv_cap=1;" commit

Ninja edit: Since you're not binding anything to the EFD pool, your proposed settings (10% global PRC, and 1% EFD pool PRC) are also correct.

Thanks,

- Sean

3 Silver

Re: Unisphere for VMAX Tiers Demand Report

I was on travel last month and couldn't respond immediately.

Thanks a lot Sean. It worked.

Dino

0 Kudos