Unsolved
This post is more than 5 years old
7 Posts
0
997
MV/A - User Admin Fracture and SRM failover/failback
Hi all,
in your opinion could be ok a failover (consistent state mirror) with this procedure and then a failback (Clariion CX4-120 flare 30 and SRM 4.1 with vSphere 4.1)
failover
1) wait that mirror are consistent (constency group configured)
2) admin fracture of group
3) i need to perform a test on active site after a heavy upgrade, if reboot fail go on step 4
4) remote promote with SRM
5) destroy SRM recovery plan
6) destroy mirror view consistency group and mirror view relatioship
failback
1) rebuild mirror view from dr site to primary site
2) rebuild SRM recovery plan
3) wait for full sync
4) run SRM DR procedure
tnx for any help!
/danilo
christopher_ime
2K Posts
0
January 14th, 2014 20:00
Please consider moving this question as-is (no need to recreate) to the proper forum for maximum visibility. Questions written to the users' own "Discussions" space don't get the same amount of attention and can go unanswered for a long time.
You can do so by selecting "Move" under ACTIONS along the upper-right. Then search for and select: "Everything VMware At EMC".
Everything VMware At EMC
See if the following videos help.
Video Link : 4077
Video Link : 4078
Video Link : 4094
Video Link : 4121