Unsolved
This post is more than 5 years old
72 Posts
0
972
can anyone help in snapview snapshot ?
i have sarted a snapshot with a session 11, the lun with id 20 has been added to the reserve lun pool how can i i ensure that session 20 will write all the changes in the data after activating and mounting the snapshot ??
also when the snapshot is taken ?? is it after starting the snapshot session or on activating the snapshot ??
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
October 30th, 2012 02:00
http://www.emc.com/collateral/software/white-papers/h1349-emc-clariion-snapview-snapshots-snap-sessn-knwldgbk-wp.pdf
etaljic81
1K Posts
0
October 30th, 2012 05:00
When the session is started that's when the COFW are started. All activating/deactivating does is allowing you to mount the snapshot to a storage group so that you can see the data.
justsanjeev
72 Posts
0
October 30th, 2012 21:00
Thanks
RRR
2 Intern
2 Intern
•
5.7K Posts
0
October 31st, 2012 05:00
Also check out the Ask the Expert discussion on (local) replication: https://community.emc.com/thread/149825
justsanjeev
72 Posts
0
October 31st, 2012 22:00
[xyz@RHEL5 VNX]$ /opt/Navisphere/bin/naviseccli -h 192.168.0.88 -secfilepath /home/galese/secfilepath snapview -createclonegroup -name XYZCloneGroup -luns 22 -description "This is a Test Clone Group" -quiescethreshold 10 -o
Creating CloneGroup failed. An attempt was made to layer an object the consumer/creator has marked non-extendable
[xyz@RHEL5 VNX]$
Can someone suggest me about the above ??
justsanjeev
72 Posts
0
November 1st, 2012 05:00
it will be id 24 ..
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 1st, 2012 05:00
lun 22 is your source ?
justsanjeev
72 Posts
0
November 1st, 2012 05:00
No this is not my source lun, prior to this i executed
/opt/Navisphere/bin/naviseccli -h 192.168.0.30 -secfilepath /home/galese/secfilepath snapview -allocatecpl -Spa 22 -Spb 23 -o
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 1st, 2012 05:00
so have you tried LUN 24 in this command ?
/opt/Navisphere/bin/naviseccli -h 192.168.0.88 -secfilepath /home/galese/secfilepath snapview -createclonegroup -name XYZCloneGroup -luns 24 -description "This is a Test Clone Group" -quiescethreshold 10 -o
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 1st, 2012 05:00
ok, so what is your source LUN ?