Unsolved
This post is more than 5 years old
2 Intern
•
26 Posts
0
40182
January 25th, 2016 08:00
Poor performance via e-port II replicator
Hi,
Just done a fresh install of Win10 and I'm getting really poor performance from my Precision M6800 when connected to the E-Port II replicator, it can take 4-5 seconds to switch tabs in task manager, all screen re-draws are terribly slow.
When the laptop is running stand alone all is fine.
I just checked and there are no drivers for the replicator, but does anything updated as far as the graphics to power this dock. Could be a faulty dock but then it's a bit of a coincidence that it only happened after the OS upgrade.
My twin Dell U2412 monitors are connected to the dock via DVI.
Also, anyone know if it's possible to test the docking station?
Thanks
0 events found
ieee488
6 Operator
•
11.1K Posts
•
38.4K Points
1
January 25th, 2016 10:00
http://www.dell.com/support/article/us/en/19/SLN148687/EN
thedavegray
2 Intern
•
26 Posts
0
January 25th, 2016 15:00
Solved it! When at work it ran like a dream, seriously fast as is two seconds to open visual studio 2015 but on the dock two minutes to open the same. Then I twigged, the power supply to the dock was the wrong one,. Swapped them and all is great.
Thanks for reading :-)