hi there

what are the full error messages?

what is the name of the software u try to install when u get the error messages?

thanks brian

Message Edited by BRIANBORU on 10-03-2004 01:53 AM

Hi Brian

Thanks for showing an interest. The software is "KAZ - learn to touch type in 90 minutes" Version 9.

The error message says only "Bad display lines".

David

T

thanks for answer.

ill see if i find somrthing

brian

http://www.kaz-type.com/

this?

brian

u said it was a different ciomputer. is it an old old computer?  thanks brian

Please note that we cannot be held responsible for any changes or modifications you may make to your PCs system files. Q. What is the minimum equipment I need to run KAZ Keyboard A-Z ? A. To run KAZ Keyboard A-Z version 9 you will need an IBM-compatible PC with 486DX processor or higher, 8MB RAM or higher and a 2 X CD-ROM Drive or higher. If you want to run KAZ version 9 with sound, you will also need a SoundBlaster audio compatible card and speakers or headphones. Versions with and without sound are included on the CD-ROM. You must be running any version of Windows up to Windows 98.To run KAZ Keyboard A-Z version 12 on a PC you will need an IBM-compatible PC with a Pentium 166MHz processor or greater, 32MB RAM or higher, 60MB of free disk space and a 2 X CD-ROM Drive or higher. If you want to run KAZ version 12 with sound, you will also need a Sound card and speakers or headphones. Versions with and without sound are included on the CD-ROM. You must be running Windows 95/98, 2000, ME, XP or NT.To run KAZ Keyboard A-Z version 12 on an Apple Mac you will need a 160MHz Power Mac with a CD-ROM drive, Mac OS 8.1 or higher, 60MB of free disk space and 16MB of free RAM . Note that your installed RAM will need to be much larger to allow for the Mac OS - click the desktop and see About this Computer on the Apple menu to discover your free RAM. Also note that virtual memory should be disregarded when determining your available free RAM.

Message Edited by BRIANBORU on 10-03-2004 08:28 AM

click the link to go to support page

Message Edited by BRIANBORU on 10-03-2004 08:30 AM

Hi Brian

I've got it to work using START>RUN>BROWSE. Then AUTORUN.EXE

Thanks very much for your help.

With best wishes

David

i did not understand from what you wrote that that problem was u could not get it to run.

oh well

by run i meant to run the installation, not run the program after it was installed , so i was searching for the wrong answer.  oh well!!!!!!!

Message Edited by BRIANBORU on 10-04-2004 01:19 AM

I never got as far as getting it to run. I was unable to load it without the error message. Somehow it seems to work now, although I do not have a desktop icon. I can live without that.

Many thanks for your help.

David