Unsolved
This post is more than 5 years old
2 Intern
•
84 Posts
0
6083
October 23rd, 2003 04:00
Lexmark Printer
Frequently, the lexmark icon in the icon tray changes from a red diamond to
a red "X" and nothing will print. It seems to happen for no reason and is
quite annoying. When I re-install the software it works again. But there
must be something that is causing this.
a red "X" and nothing will print. It seems to happen for no reason and is
quite annoying. When I re-install the software it works again. But there
must be something that is causing this.
No Events found!


fireberd
11 Legend
•
33.4K Posts
•
112.8K Points
0
October 23rd, 2003 09:00
olopski
2 Posts
0
November 8th, 2003 05:00
Hi
I have the same computer configuration as you, and a lexmark all in one x85 printer. It was doing me the same way, sometimes it would work, the next time it would say it couldn't communicate with printer. Or that it didn't recognize having one attached. I contacted lexmark and they sent me an e-mail with a link to a small piece of software or driver to install and I haven't had anymore problems. Hope this helps
olopski
johnp999
16 Posts
0
November 8th, 2003 21:00
Olopski.. Would you mind providing that link.. I have an X85 and am continually having the same problem of
not communicating with the printer.. If i hear that one more time I am going to have to tear my hair out..
DIM 8250 2.4GHz
XP Pro SP1
ATI Radeon 9700 TX 128MB DDR video card
120 GB Ultra ATA/100 Hard Drive
512MB PC1066 RDRAM
NAV 2003
Soundblaster Live! sound card
Intel Pro 100M Integrated PCI NIC card