USB stick not recognised in one-time bootmenu D90D7
Hello everybody ,
Today I was trying to pull the firmware of the D90D7 with a USB stick, configured with the "Wyse USB Firmware Tool", but my USB stick was not recognised in the one-time boot menu.
So I went into the BIOS and there I saw an option called "Boot from USB", which is "disabled". You have change this setting to "enabled". Restart your machine and go to one-time bootmenu by pressing "p" during boot.
Hopefully this helped some of you guys
The D Class device have a BIOS option to "Boot from USB" which is Disabled by default. To enable, follow these steps:
1- Power the D90D7 on while holding the Delete key
2- Enter the password when prompted (Fireport)
3- Select the "Advanced" tab
4- Using the down arrow key, select the "Boot From USB" option, press Enter and Select "Enabled"
5- Press the F10 key and save your configuration.
Visit our Dell Wyse Thin Client Knowledge Base and Manuals web site at www.wyse.com/KB
Visit our Dell Wyse PocketCloud Knowledge Base and Manuals web site at http://pocketcloudsupport.wyse.com/forums