You can not use this update because the servicepack can not be used for WES7. You can download a base image from wyse.com with SP1 intergrated. you can download WES 7 WFR2 Common Image (2.09 GB) V9.02 B818 from http://wyse.com/serviceandsupport/su...20%28WES%29%29
I need some more help with this. So, I downloaded the file in the link above. I chose my thin client type and there are 3 files in the folder (bios,cmos,and commands). I try to burn a cd/dvd with the first 2 files and I am unable to do it because the "image file isn't valid". My question is, what's the proper way to install this image?? I am a little lost and I could take some help with this. THANK YOU!
You need to use the right rsp file to register and import the image into WDM. After you imported the image you can distribute the image using WDM. You can also use the USB Firmware Tool if you don't have WDM running
mvdsteen
19 Posts
0
May 20th, 2015 08:00
Hi Jan,
You can not use this update because the servicepack can not be used for WES7. You can download a base image from wyse.com with SP1 intergrated. you can download WES 7 WFR2 Common Image
(2.09 GB) V9.02 B818 from http://wyse.com/serviceandsupport/su...20%28WES%29%29
Jan_Durand
6 Posts
0
May 29th, 2015 01:00
I need some more help with this. So, I downloaded the file in the link above. I chose my thin client type and there are 3 files in the folder (bios,cmos,and commands). I try to burn a cd/dvd with the first 2 files and I am unable to do it because the "image file isn't valid".
My question is, what's the proper way to install this image?? I am a little lost and I could take some help with this.
THANK YOU!
Jan_Durand
6 Posts
0
May 29th, 2015 01:00
Thank you. I will give it a try and let you know.
mvdsteen
19 Posts
0
May 29th, 2015 01:00
No problem, you're welcome
Jan_Durand
6 Posts
0
May 29th, 2015 01:00
Thanks mvsteen. I used the USB firmware tool and it worked just fine.
mvdsteen
19 Posts
0
May 29th, 2015 01:00
You need to use the right rsp file to register and import the image into WDM. After you imported the image you can distribute the image using WDM. You can also use the USB Firmware Tool if you don't have WDM running
_Magneto_
6 Posts
0
June 1st, 2015 03:00
Using the USB Firmware Tool probably the easiest.