Hello, 

thanks in advance:-

 

I have two dell R730 servers with dual HBA ports, one brocade 300 switch and scv3020 dell storage with 4 HBA ports. 

in order to create the fault domain 1:-

Server1-Port1 connected to switch port 1

server2-port2 connected to switch port 2

 

Topcontroller port 1 connected to switch port 4

top controller port 3 connected to switch port 6

bottom controller port 1 connected to switch port 3

bottom controller port 3 connected to switch port 5

 

First question:- does this above cable connection is ok? 

 

Now, I did a zoning on brocade switch want to know is it correct way to do it?:-

alicreate "TopControllerPort1","50:00:d3:10:04:6e:78:05"
 alicreate "TopControllerPort3","50:00:d3:10:04:6e:78:07"
 alicreate "BottomControllerPort1","50:00:d3:10:04:6e:78:19"
 alicreate "BottomControllerPort3","50:00:d3:10:04:6e:78:1b"
 alicreate "Host1_P1","21:00:34:80:0d:6f:95:4f"
alicreate "Host2_P1","21:00:34:80:0d:6f:8a:93"
---------------------------------------------------------------------------------

Zone Create:-

zonecreate "ESXI_HOST1","Host1_P1;TopControllerPort1"
zoneadd "ESXI_HOST1","Host1_P1;TopControllerPort3"
zoneadd "ESXI_HOST1","Host1_P1;BottomControllerPort1"
zoneadd "ESXI_HOST1","Host1_P1;BottomControllerPort3"

zonecreate "ESXI_HOST2","Host2_P1;TopControllerPort1"
zoneadd "ESXI_HOST2","Host2_P1;TopControllerPort3"
zoneadd "ESXI_HOST2","Host2_P1;BottomControllerPort1"
zoneadd "ESXI_HOST2","Host2_P1;BottomControllerPort3"

=========================================================================

zoneset................

cfgcreate "ESXI_Cluster","ESXI_HOST1;ESXI_HOST2"

======================================================

cfgsave

====================

cfgenable "ESXI_Cluster"