As indicated, I purchased the Precision m3800 Developer Edition. Since I'm not a developer, I clean installed Ubuntustudio 14.04.2. Unfortunately, I neglected to back up Grub and apt/sources.list.
ISSUE #1
Grub no longer offers:
Restore to Factory Settings
Dell Diagnostics
I was very careful to avoid touching those partitions, and I've confirmed that they are still on the SSD.
ISSUE #2
My installation is missing the things DELL added to the onboard installation, notably the Nvidia package.
MY REQUEST:
If someone will kindly provide a text file of the default, factory fresh /etc/apt/sources.list and /boot/grub/grub.cfg, I can make the repairs myself. Thanks in advance.
You should probably utilize your support contract and talk to support, as this is going to be difficult to walk you through on a forum.
Also, I don't understand it when people go and blow away a perfectly good Ubuntu installation to install another Ubuntu flavor. Those flavor installers just install a different set of packages. There's nothing special about them other than that. You can very easily go and install the same packages without blowing away an existing install.
I just received my M3800 with Ubuntu 14.04 pre-installed from Dell. However somehow at first boot after entered the initial setup like wifi, timezone, keyboard and admin user details the installer crashed.
I probably have a semi configured(*) machine with OEM as admin user and I had to guess the password (oem :emotion-1:). I'd like to try to re-run the first boot setup which is probably achieved by factory reset.
I tried the esc as you mention and I get the following (GRUB) options :
Ubuntu <- just boot as usual
Advanced options <- which is booting normal or in a save mode
Setup <- which gets me to a BIOS setting environment after which the machine boots as it was.
Am I missing something ?
(*) at least I hope that e.g. some better video drivers would be installed/configured because :
at the high resolution of 3840x2160 and a rescaling menubars and titles [in the Display setting] of 2 (to have something readable) the screen is all messed up. Setting rescaling to 1 works but I need to use a microscope to read. [so this may be an Xorg issue rather than a driver issue]
and glxgears appears to work but spits out a lot of errors/warnings
I have also following issues :
I cannot ctrl-alt-Fn to switch to a alternate tty terminal (which is an operation I require to change the admin username (see http://askubuntu.com/questions/228696/how-to-change-administrator-username ). I found how to get GRUB (press esc at boot) and drop into a root shell : however following the procedure shown in the link results in "cannot lock /etc/passwd; try again later.". Also this root shell appears really small and worse the bottom lin is missing so that one has to type the commands blindly.
keyboard backlight does not work (note it did work initially and then stopped working : the only thing I think happened was the Ubuntu updates).
I also note that there is a dell-driver application which appears to want to install downloaded drivers (i.e. selected from a file selector) but alas I don't know where to download what the drivers for this model.
Hi, my case is a bit different but here's my good reason for not using the pre-installed Ubuntu: I already had all my stuff installed on a fast SSD with Kubuntu 14.04 LTS and I just swapped the disk before even turning the M3800 on.
Now "almost" everything works fine, just a simple question:
are there any M3800 specific ppa or packages that I should install to get bumblebee (or other M3800 HW) working?
I also have occasional WIFI disconnections and general poor signal, in a word: my old DELL Latitude E4300 had much better (nearly perfect) Linux support.
Well, it's Linux after all, most of the times you just plug the HDD in and the machine just starts :)
The reason why I'm asking is that in the original shipped HDD there are a couple of strange packages, if it's a vanilla Ubuntu, why it ships those packages? You can easily see that some of them are Nvidia-related and other are DELL related.
BTW, before bumblebee I've also tried nvdia prime from Ubuntu repos and it didn't work either. So, I'm now the proud owner of an expensive Nvidia Quadro that I cannot use.
This is a list of original HDD "strange" packages (what means that somerville suffix?):
Regarding "bumblebee", as I understand it, that package has been deprecated in favor of Nvidia Optimus. Optimus allows easy switching between gpu profiles, e.g. "normal/intel" or "nvidia" graphics. The Nvidia driver supplies this functionality.
I believe the 14.04 OS is plain vanilla, i.e. no PPA's.
Yes, Canonical hosts separate archives for updating these (again, until the changes get folded into stock Ubuntu). You can find them under /etc/apt/sources.list.d on a factory installed system.
Honestly, my suggestion is if you want Kubuntu, use the factory image and then install the Kubuntu meta packages.
In the mean time I got most of the problems above sorted out and "the costumer" (my son) is very happy with the laptop.
I had a question about the SSD on mincard not being compatible (at least one cannot select that option when choosing Ubuntu as OS). Will that be resolved (when ? as in : there are substantial (-28%) promotions going for the moment until end of April).
I had a question about the SSD on mincard not being compatible (at least one cannot select that option when choosing Ubuntu as OS). Will that be resolved (when ? as in : there are substantial (-28%) promotions going for the moment until end of April).
Yes. My understanding is that the fix should go into the factory soon. The problem actually had to do with installation with more than one drive, but somehow that go turned into restricting against having a minicard.
DELL-Jared D
2 Intern
•
350 Posts
810
0
Posted February 26th, 2015 07:00
You should probably utilize your support contract and talk to support, as this is going to be difficult to walk you through on a forum.
Also, I don't understand it when people go and blow away a perfectly good Ubuntu installation to install another Ubuntu flavor. Those flavor installers just install a different set of packages. There's nothing special about them other than that. You can very easily go and install the same packages without blowing away an existing install.