
UNSOLVED
SNTP on PowerConnect 5524 won't synchronize time.
Hi there,
I'd like to get some help on getting SNTP to work on Dell PowerConnect 5524. It seems to be simple to set up, but it doesn't really work. I can ping the NTP server but the clock remains unsynchronized for some reason. I've scrolled the forums on and on and there seems to be a solution by adding a specific security management permit rule as switch will drop the SNTP traffic if that rule isn't there. I added the rule but time remains unsynced. Can anyone show me a proper way of doing this? I'm running the latest firmware:
dellsw-5524# show bootvar
Unit Image Filename Version Date Status
---- ----- --------- --------- --------------------- -----------
1 1 image-1 4.0.1.11 16-Oct-2011 18:10:50 Not active
1 2 image-2 4.1.0.24 01-Sep-2020 14:40:38 Active*
"*" designates that the image was selected for the next boot
dellsw-5524#
SNTP configuration:
dellsw-5524# sh sntp configuration
SNTP port : 123 .
Polling interval: 60 seconds.
No MD5 authentication keys.
Authentication is not required for synchronization.
No trusted keys.
Unicast Clients: Enabled
Unicast Clients Polling: Enabled
Server Polling Encryption Key
----------------------------- ---------- --------------
162.159.200.123 Enabled Disabled
Broadcast Clients: disabled
Anycast Clients: disabled
No Broadcast Interfaces.
dellsw-5524#
SNTP status:
dellsw-5524# sh sntp status
Clock is unsynchronized
Unicast servers:
Server Status Last Response Offset Delay
[mSec] [mSec]
--------------- --------- ------------------- --------- -------
162.159.200.123 inProcess 00:00:00.0 Jan 1 00 0
1900
Anycast server:
Server Interface Status Last Response Offset Delay
[mSec] [mSec]
--------------- --------- --------- ----------------------- --------- -------
Broadcast:
Interface IP address Last Response
------------ --------------- -----------------------
dellsw-5524#And clock remains unsynced forever.
Responses (0)
Solutions (0)
