Hi,

Hello

I have a DELL Precision T7600 workstation (Intel chipset C600) where the PERC-H310 RAID/SAS controller broke. Since I have BIOS A17 installed, I was able to connect the SAS cable directly to the motherboard which also has two SAS slots.

In BIOS I have "Legacy Boot" enabled, "AHCI" is also enabled as well as "SATA/RAID Operations". In the boot process, the "IntelRapid Storage Technology Enterprise SCU Option ROM 3.7.0.1049" is accessed via the key combination "CTRL + I". There I set up a RAID-0 with the three hard disks, which also appears in the BIOS under "Drives".

If I now boot from the Windows 10 USB stick, I get into the installation routine up to the point where you select the drive to be installed. The selection bar there is empty! I also downloaded the latest INTEL RSTP drivers and unzipped them to the USB stick using 7-ZIP - all inf files I found. None of them cause the drive to be recognized by the Windows installation routine during installation.

Do any of you know the problem and with which BIOS setting or driver, the drives become visible during the Windows installation?

Many thanks

LG, J.