Unsolved
4 Posts
0
3156
December 16th, 2020 17:00
Aurora R10, mounting Corsair H60
I'm looking to install the Corsair H60 cooler to my Aurora R10. Since there is nowhere on the motherboard to use the AMD hardware that comes with the H60 I take it I will have to use the Intel one. My question is can I use the Intel standoff screws with my AMD?
No Events found!
r72019
6 Professor
•
5.3K Posts
1
December 16th, 2020 21:00
Yes, you use the Intel brackets. The R10 motherboard uses the intel 100mm spacing specs, it is drilled into the board so it won't accept an AMD mounting bracket. The plus side is the treading is the same for the H60 intel bracket and the Aurora so you don't have to remove the motherboard.
Burgeo
4 Posts
0
December 17th, 2020 03:00
Cool. I see it comes with two types off intel standoff screws, one for LGA 1155/1156 and one for LGA 2011. Am I correct to assume I use the 1155/1156 ones?
r72019
6 Professor
•
5.3K Posts
1
December 17th, 2020 07:00
Yes, 115x and 1200 sockets are all on the same Intel 75mm hole spacing, 100mm keepout zone specs.
Burgeo
4 Posts
1
December 18th, 2020 19:00
A guy just uploaded a step by step instructions on YouTube.
https://youtu.be/POnyAepWyQs
r72019
6 Professor
•
5.3K Posts
0
December 18th, 2020 22:00
@Anonymous "Note the he is not getting the VRM startup error . . . even though he has no VRM installed."
From my understanding that was first added with the R11. He has an R10. I haven't see anyone report that error on an R10. The youtube video should probably update the title to say "R10"
r72019
6 Professor
•
5.3K Posts
0
December 19th, 2020 12:00
Yeah I was referring to the startup error being first added or reported on the R11.
But another thing to note is the two VRM heatsinks aren't linked with a copper base in the R10 photo.