Aurora R5-R12 LED controller power switch pins

oem motherboard proprietary LED controller header may use different pinout for the power switch.  

e.g., Front panel pwr sw connector on white 12 pin motherboard header pins 4 and 5 on the R8, pins 3 and 4 on the R7

R6 user reported pin 3 and 4 of led controller white connector are the pwr sw.

R9 user reports pin 3 and 4.

R10 user reports pins 4 and 5 (from the left) on the led controller header enabled the case power switch

R11 pin 4 and 8.

Although some Aurora models use same power button or led cable, it is the motherboard LED controller pinout that could vary among models.

DP/N 29F15 = R5 and R6 power button

Dell part 0JNP2 = power button cable Aurora R9/R10/R11/R12

if one believes these user reports,

R6 and R7 and R9 use pin 3-4,

R8 and R10 use pin 4-5.

R11: pin 4-8

R12 pins 4 and 8 turn the power on and off. Pins 4 and 5 only turn it on

R5 ? same as R6