Unsolved
This post is more than 5 years old
5 Posts
0
3598
August 21st, 2018 13:00
not connected to an nvidia GPU
I just received an AURORA R7 with a 1070ti GPU.
I have connected the new monitor I bought. It is an S2716DG.
When I try to use the NVIDIA control panel, I get the message "you are not currently using a display connected to an NVIDIA GPU".
I received 3 cables with the monitor. A typical HDMI cable, a cable that I believe is used to activate the USB ports on the monitor and another cable that looks somewhat similar to an HDMI cable which I believe is a DP cable (whatever that is).
I plugged the DP cable into the PC and monitor. I also have the cable that enables the USB ports plugged in.
Not sure what else I need to do.
No Events found!
Tesla1856
10 Wizard
•
17.8K Posts
•
71.1K Points
0
August 21st, 2018 18:00
Connect the DisplayPort cable from the monitor to the Aurora-R7 . Be sure you are using a DisplayPort on the Nvidia GTX-1070ti card itself (towards the bottom of case).
If you have all that and still get that message, it might have something to do with G-Sync tech (not sure, I don't use it).
Eimy_B
6 Operator
•
4.4K Posts
1
August 22nd, 2018 15:00
Hi @martinc31415,
This message usually appears when the monitor is connected to the on-board card (top half of the system), so as per Tesla says, make sure you're connecting the monitor to the Nvidia card at the bottom.