1 Rookie

 • 

11 Posts

1153

October 16th, 2022 11:00

R10 Memory Upgrade - What works?

I plan to upgrade my R10s RAM to dual channel after it arrives, but I’m not so sure on what RAM configurations are supported. I am planning to get Corsair Vengance LPX 3200mhz or crucial ballistix 3200mhz Does anyone know if these would work?

1 Rookie

 • 

52 Posts

October 16th, 2022 21:00

I got 4x8gb (2 2xgb kits), Crucial 16GB Ballistix DDR4 3200 MHz UDIMM Gaming Desktop Memory Kit (2 x 8GB, Black), running at 3200mhz with no issues in my R10.  With some bios updates in 2021, it would reset my memory back to 2700 and I'd have to redo my XMP.  Past 9 months with lastest bios had no issues and has been very stable.

However, according to the service manual, for 32gb of memory, I should have gotten 2x16gb.  I don't plan on ever going beyond 32gb

 

jdubyas_0-1665980769499.png

 

2 Intern

 • 

210 Posts

October 16th, 2022 12:00

I had good results (R10) with crucial. BL16G32C16U4W.M16FE1  64GB . 2x 32GB kits  (4x 16GB modules)These are dual rank (M16FE1) . Passes all the tests even after several bios updates

memory.jpg

 

1 Rookie

 • 

11 Posts

October 16th, 2022 13:00

What speed can you run them at? Are they th ballistix?

1 Rookie

 • 

17 Posts

October 16th, 2022 14:00

This is what I have and it works fine.  I have it running at a stable 3466mhz with the XMP-3200 Timings at 1.35v. These are crucial ballistx 3200mhz 2x16GB kit.  I have tried running them at 3600mhz but my R10 does not like it.

boss429_0-1665955630045.jpg

6 Professor

 • 

7K Posts

October 16th, 2022 15:00

What R10 do you have? There are 2 different versions of the R10. 1 with Ryzen 3000 CPU, one with Ryzen 5000 CPU.

1 Rookie

 • 

17 Posts

October 16th, 2022 16:00

I have the gen 1 r10 with the ryzen 3000 cpu. I'm hoping that dell will at some point release a bios update to allow for a ryzen 5000 cpu, but i'm not holding my breath.

2 Intern

 • 

210 Posts

October 16th, 2022 16:00

Those are the ballistix running xmp @3200 mhz. I have the gen1 r10 The crucial site has only two choices Ryzen Ed. and Ryzen Ed. R10. They both list the same one .

https://www.crucial.com/upgrades/alienware/alienware-desktops

I had the original Dell one's (32GB). (I tried one set Dell and crucial that worked well , then  I bought another crucial set and removed the Dell set.)So far no trouble.Now all 4 modules are the same.

I did try a pair a HyperX  XMP 3200 with the Dell pair (different speed,latency etc.) that worked for a while ,it did pass the pre-boot memory diagnostics but failed with other memory tests after bios upgrade.

In case of doubt just run the crucial scanner to confirm.

 

6 Professor

 • 

7K Posts

October 16th, 2022 19:00

They will not release a BIOS update to support Ryzen 5000 on that platform.

As for the memory, up to XMP 3200 is supported on that platform. There is a thread on this board somewhere that provides some information from other users on what works and what does not. 

These systems offer very limited support for aftermarket memory modules. The only ones to be guaranteed to work are the OEM modules listed in the FAQ: R10 FAQ 

Only up to the 3200 modules work in the R10 Ryzen 3000.

1 Rookie

 • 

11 Posts

October 16th, 2022 20:00

Ryzen 7 5800(no x)

2 Intern

 • 

200 Posts

October 17th, 2022 01:00

100% compatible and functional.

Real_Boy85_0-1665993876963.png

 

1 Rookie

 • 

11 Posts

October 17th, 2022 19:00

The Aurora R10 specifications are a Ryzen 7 5800(no x), RX6800XT, 1000w PSU, and 1 stick of 3466MHz ram. I am planning to sell the one stick and upgrade to dual channel, but now I’m not sure what RAM kit to buy? Generous fellows have confirmed that Crucial Ballistix gaming RAM would be compatible, but the price on that kit is just too high for my liking. Corsair LPX vengeance(2x8GB 3200MHz) on Amazon is going for a pretty low price. I was just wondering If any of you had compatibility with that in the Aurora R10. Thanks again. 

6 Professor

 • 

7K Posts

October 18th, 2022 03:00

These systems are very picky when it comes to aftermarket memory support. Even if it works on one BIOS, the next BIOS update might break that compatibility.

So be very careful what you pick and always pick what has been known to work for others, to avoid headaches.

The only memory to guaranteed work is the OEM validated memory and the part #'s can be found in the R10 FAQ.R10 FAQ 

 

Your R10 supports up to 3,400 Mhz, and since Ryzen likes faster memory speeds I would opt for that rather then 3,200 Mhz, if the timings are the same. If the timings are not the same you have to do a calculation to figure out which kit is actually faster.

If you are going the aftermarket route ensure to purchase Dual kits only. Don't purchase 2 single sticks, always kits.

No Events found!

Top