1. At almost Idle (answering this post) ... Thermal Controller Ambients are reading 27c , Intel i7-930 cores are reading around 42c, AMD 5870 is 58c
2. What is the make and model of the WiFi card? Where does it connect to Aurora? Does Device Manager say the driver is installed properly? Do other WiFi devices in your house work (with that router)? Is running a real ethernet cable an option (it would be better in the long run any way). Using WiFi on a large powerful stationary gaming desktop is kinda lame.
1. I've never heard of Ralink Tech WiFi card. Have you tried un-installing, reboot, and then re-installing it's drivers? Read previous post more carefully.
2. Try this:
Completely Uninstall Command Center and reboot.
Power down, unplug the power cord from the back of you PC, then press and hold the power button down for 10 seconds to drain residual power from MIO board to further reset it and to insure a trouble-free CC install. Then, power back up and go into Windows.
Disable your Anti-Virus software. Install the latest Command Center (for desktops) and reboot. v2.6.17.0 should work on an R3 Note: The first time this version is installed, it will upgrade the MIO-Board's firmware to v2.x Microsoft Net 4.0 Client Framework is required for install. You can get it from Windows Update. Test operation.
Tesla1856
8 Wizard
•
17.4K Posts
0
March 29th, 2012 20:00
1. At almost Idle (answering this post) ... Thermal Controller Ambients are reading 27c , Intel i7-930 cores are reading around 42c, AMD 5870 is 58c
2. What is the make and model of the WiFi card? Where does it connect to Aurora? Does Device Manager say the driver is installed properly? Do other WiFi devices in your house work (with that router)? Is running a real ethernet cable an option (it would be better in the long run any way). Using WiFi on a large powerful stationary gaming desktop is kinda lame.
Cherry19991
4 Posts
0
March 30th, 2012 18:00
Ralink Technology, Corp.
the blue tooth part of the card works.... proven with iphone
right now sensors are at 87/67/87
sometimes its diff temps on sensors
vid card is the 2nd reading but when i check othr stuff
42-43c on each of the 4 cores
its around 50c on my vid card but
the HD fan according to the comand center if it goes 100% its loud
if its lower than that its fine.
PCI fan at command center is 4% and 30% its quiet.
they had to adjust it.
what made me mad as heck when tech disabled stuff i need such as the AW mouse and kb related items
as well as my dell printer and Iphone related software
Tesla1856
8 Wizard
•
17.4K Posts
0
March 30th, 2012 23:00
You likely have 2 separate issues:
1. WiFi Card
2. MIO-Board offline
--
1. I've never heard of Ralink Tech WiFi card. Have you tried un-installing, reboot, and then re-installing it's drivers? Read previous post more carefully.
2. Try this:
Completely Uninstall Command Center and reboot.
Power down, unplug the power cord from the back of you PC, then press and hold the power button down for 10 seconds to drain residual power from MIO board to further reset it and to insure a trouble-free CC install. Then, power back up and go into Windows.
Disable your Anti-Virus software.
Install the latest Command Center (for desktops) and reboot. v2.6.17.0 should work on an R3
Note: The first time this version is installed, it will upgrade the MIO-Board's firmware to v2.x
Microsoft Net 4.0 Client Framework is required for install. You can get it from Windows Update.
Test operation.
Cherry19991
4 Posts
0
March 31st, 2012 19:00
side note. right now vid card is running 62 Farenheit according to the censor. Second on the fan thing
100percent you cant hear yourself.
Cherry19991
4 Posts
0
March 31st, 2012 19:00
CC removed then updated
there is this small card inside the machine. that was replaced.
it just wont enable.
I got net 4.0
They done that thats when they messed with drivers for the KB and the mouse and the printer
and my CELL PHONE