Unsolved
This post is more than 5 years old
24 Posts
0
8676
August 10th, 2010 09:00
Area 51 BIOS
I just received my Area 51 last week. It has the 980X processor in it with the BIOS Version A07. I was not sure why they did not install the A08 version, but noted it had support for the 980X processor. I am not having any problems with it, but was curious how the bios was even completing startup if the A07 shouldn't even recognize the processor. Would it be better to update to A08, or should I just stick with A07 since I am not having any issues?
Thanks
No Events found!



Danor
72 Posts
0
August 10th, 2010 09:00
I believe if it is not broke do not fix it, if everything is running good I would not change a thing, but if you start having problems
then consider it.
douglaz
8 Posts
0
August 10th, 2010 15:00
Go to Drivers and Support page and under bios go to A07. Under "Fixes and Enhancements" it says "Adds support for Gulftown 980x"
phi1316
24 Posts
0
August 10th, 2010 17:00
Didn't realize it said that, as A08 apparently adds the same support. In either case, I updated to A08, but it either didn't take effect, or it shows A07 by mistake still. Don't know if anyone else had that issue when they updated the BIOS.
Tesla1856
8 Wizard
•
17.1K Posts
0
August 10th, 2010 21:00
Double check you got the right file. Enter your Service Tag. Just download the file again.
I'm guessing it's one you run from Windows. Save it to your HDD. Go to Properties and Unblock it. Turn off your Anti-Virus temporarily. Try again.